All Flagged Aggressive / Frustrated User Lines

does wta connect in godmode need an update compared to what wta connect does currently?

okay but why dont i see the menu on my screen then!!

still not working.. why doesnt the app start up... it has been 5 hours now of constant irritation

ok now loads, but i see my user, but i cannot select any user.. again super user has access to all subscribers, and has godmode rights... plus i get following issue

it is still not logging in.. GOD WHEN ARE YOU GOING TO FIX THIS.. you can use my credentials: wtenasbroek@gmail.com and biz5222AR! as pasword.. sort this shit out

great more spinning, said back end was waking up something like that... sign in timed out... still first login passes, then menu loads, then user appears... still no link between user and subscriber FUCK!!!!

i really do not know what you are smoking

i really do not know what you are smoking

Add boot diagnostics to the startup up to the menu so you can do proper diagnostics.. do the 6 time loop again

can you do a full deep dive forensic root cause of the startup process.. it is not working.. it keeps showing loading bars, login screens, MFA login.. can you rebuild it from scratch.. because this is not working.. been working on this for most of the day.. really frustrating!

the load is not working.. can you please stop and start from scratch for the startup.. it is patch on patch again.. i want a clean startup sequence. not a patch work.. can you confirm that? can you have claude help you on this?.. clearly you are not able too do this.. i have spend over 300 credits on this.. and I am not anyway closer for a stable build

app is not starting up correct I AM FED UP.. SPENDING A FORTUNE ON THIS... and i am not anywhere closer to a stable build... do we need to take the startup sequence out of the app itself? give me suggestions.. or get claude involved.. i am done

AGAIN THE APP IS NOT LOADING AFTER THE LOGIN SCREEN.. I ENTER USERNAME/PASSWORD.. AND i CANNOT LOGIN.. DO ANOTHER 6 LOOP DEEP DIVE ANALYSIS OF THE STARTUP SEQUENCE ALL THE WAY TO THE MAIN MENU AND THE SIDEBAR LOADING.

the diagnose all button in translation engine doesnt work

the diagnose all button in translation engine doesnt work

Reset the failed i18n items that have 'Not enough credits' errors back to pending so they can be retried. i put 500 euro to the platform, that should work again

can you and claude agent work on getting a proper startup sequence in place that loads the app including sidebar without a hick up.. run a 8 times improvement itteration... I am fed up that it doesnt load

what the fuck.. we have a bot user for logicorp.. why does this come back over and over

no it is not working.. can you do a deep dive.. there are a lot of screens appearing.. that should either stay in the back.. or a counter should run or a loading bar... but this would not give me confidence.. the start up needs to be solid.. not error screens, flashing screens... etc..

no it is not working.. can you do a deep dive.. there are a lot of screens appearing.. that should either stay in the back.. or a counter should run or a loading bar... but this would not give me confidence.. the start up needs to be solid.. not error screens, flashing screens... etc.. can you add claude to the mix to help with resolving this?

loadingS IS STILL MESSY CAN YOU DO A 5 TIMES LOOP AGAIN LIKE BEFORE UNTIL YOU GET THE START UP MENU.. I DONT WANT TO SEE ANY JUMPING OF SCREENS

okay stop.. this is not working. can you do a deep dive, rewrite of the start up sequence.. now we are patching again.. first do it without security like MFA.. to make sure it works properly.. then after that we add security again.. add claude to the whole evaluation and reasoning process... the menu needs to load fast without flashing screens.. clean, fast loads boost confidence in the platform.. ...

i dont get why the app still shows the MFA screen... i saved it but comes bac kagain... and it is not loading the main page again... FRUSTRATING

even when i log out.. log back in .. and then go through start menu.. i still cannot see menu on the side of the app to navigate.. really frustrating.

but can you also login to the platform.. because again it doesnt load beyond that point

KICK OFF BULK ENRICHMENT ON WIKI. DO THEY ALL GET IMAGES?

HOW COME I TELL WITH GOLDEN RICH CONTENT CREATION FOR WIKI I WANT IMAGES FROM LOGICORP.. AND IT IS BEING IGNORED

HOW COME I TELL WITH GOLDEN RICH CONTENT CREATION FOR WIKI I WANT IMAGES FROM LOGICORP.. AND IT IS BEING IGNORED. ONLY RICH SCREENS WITH ACTUAL DB CONTENT.. IF NOT THERE THEN POPULATE DB BEFORE MAKING IMAGES

CREATE LYRA AS AI AGENT

CAN YOU MAKE SURE LYRA GETS ALL THE OTHER RULES AI AGENTS SHOULD HAVE AS WELL? I WANT TO MAKE SURE LYRA CANNOT BYPASS ANY OF THE AI RULES OF THE OTHER AGENTS EITHER...

CAN YOU MAKE SURE LYRA GETS ALL THE OTHER RULES AI AGENTS SHOULD HAVE AS WELL? I WANT TO MAKE SURE LYRA CANNOT BYPASS ANY OF THE AI RULES OF THE OTHER AGENTS EITHER...

CAN YOU MAKE SURE LYRA GETS ALL THE OTHER RULES AI AGENTS SHOULD HAVE AS WELL? I WANT TO MAKE SURE LYRA CANNOT BYPASS ANY OF THE AI RULES OF THE OTHER AGENTS EITHER...

CAN YOU REVIEW ALL WIKI PAGES AND ADD IMAGES TO THEM WHERE APPROPRIATE SO LIBRARYAN CAN CAPTURE ALL THE RIGHT IMAAGES FROM LOGICORP

why doesnt the i18n translation engine start

can uou add thT TO MENU UNDER ENGINEERING I18N AUDIT

I STILL DO NOT SEE PROGRESS IN THE TRANLSATION ENGINE... STILL 1818, TRANSLATED 512, 75 READY TO SCAN.. 1231 NEED CONTENT.. BUT NOTHING IS MOVING

CONTINUE

again an error 3047ff91798fdcdc6c2c77f815ab449e

why is the wiki process not working?

are you asking me again to make drect connection from the platform?

any governance documenta need to be added to the god mode wiki?

again images can you use logicorp you have login details.. you really need to stop asking me for this

do we have all the architecture documents in the wiki in god mode complete?

why dont i see the rich wiki? i reloaded i do not see difference

again.. you have login details of logicorp

Yes

why doesnt the claude link from platform to wta connect work?

The platform-claude-gateway edge function is live and tested ✅ WTA Platform should call it like this: POST https://ufcskzxaujtmniqsieqp.supabase.co/functions/v1/platform-claude-gateway Headers: Authorization: Bearer eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJpc3MiOiJzdXBhYmFzZSIsInJlZiI6InVmY3NrenhhdWp0bW5pcXNpZXFwIiwicm9sZSI6ImFub24iLCJpYXQiOjE3NzIwNDA5OTUsImV4cCI6MjA4NzYxNjk5NX0.gH2K3oHPo4ztXfH ...

i would like to add claude to the platform god mode for platform for process import and for the process library... and flow doctor... would that work? i setup a claude integration into wta connect

i do want to destilate wiki documents from god mode that can be visible on t6 level.. perhaps we might need to rewrite or filter out docuemts that need complete rewrite.. as the wiki in god mode is mostly internal documentation we might need to plan this in seperate? what is your thought?

for my understanding.. we then make sure that sensative information does not end up in the wiki of subscribers, plus god mode document changes then the wiki of customer changes as well? i do not want to constantly manage wiki

yes, these t6 wiki pages also sit in god mode?

i am getting worried here this needs to work again.. can you do a deep root cause analysis and review startup sequence and get it to work again

anymore documents or wiki pages need to be added to the wiki of godmode?

can you create all the missing documentation and wiki in the wiki in god mode?

the agents need to actively check the exisiting (sub) processes before they make recommendations.. they can take their time.. this is an important step.. again and again. wade is to easy to step over all existing processes created.. it is frustrating

rate again

why dont i see the new phase in the process import process?

Yes

i just realized something.. i finalized the new validatelocation process. but the process did not ask me to create the missing properties.. so clearly not working

Yes

i am absolutely pissed off... again the screen reloads and i loose everything on the process import... that really needs to be resolved!!!!!

mermaid ddoes not work in process import again can you do dee root cause analysis?

there are 2 verify items in the process library.. why doesnt the system flag this?

fix it once and for all.. FUCK... i cannot work like this.. everytime it is one step forward two steps back..

hang on what... i check the process verifylocation... THAT ACTUALLY has a process in int.. and v2_wh_location_validation is emplty... what the fuck

again i do not see any processes in the process library in wta holding

why do you say that the processes sitting in process library get rich context.. when clearly they do not.. i just create 3: call: sub_scanner_ etc.. NO FUCKING DESCRIPTIONs.. you say you do things and then you clearly do not.. really frustrating

okay.. now i do not see any of the processes in the proces library EVERYTGING is gone... what the fuck!

okay again it doesnt save the draft in the process import.. I get now start of the process again... this isnt working at all.. crucial that it gets saved.. so perhaps we need to keep versions of the saved process.. so we can select which one to open.. because it is crucial that we can save a process

FUCKING ANNOYING, I have to start over yet again

my drafts when clicking do not appear to the front.. and again.. i was working on a flow screen reloaded everything gone.. start from scratch

and you would want to open the flow again in the process import.. with all the history and context so that the agents can also use that for feedback.. makes sense?

could we start up the general picking process import again? i want to get the subprocesses out of it?

it is not true what you are saying.. i uploaded a word document in my latest start.. now it shoulws me all the python files again...

again you are showing the old process import.. with the python scrips.. not the one with the wod document

again the diagram is not loading in the process import..

i am so annoyed.. everytime i start a process import in wta holding.. and somehow it always ends up in logicorp.. The default route for fallback of the super users should always be the wta holding environment.. this is so frustrating.. i am working on genome processes and again i am creating them in subscribers.. this way i get lost what is where!

again everytime from a idle state the app stops showing.. this really needs to get fixed... really annoying

FUCK... i lost all work i did on general order picking. again the platform shows me an old view..

how can that be.. I PRESSED SAVE DRAFT

WHAT THE FUCK DO I READ THAT IN GENOME IT DOES NOT SAVE? AGAIN WTF... i am super user.. saving in genome is allowed by me!

I AM REALLY UPSET I WORKED FOR couple of hours on this

again preview not loading

NOW I AM GETTING REALLY UPSET! again i see an old view of the process import.. you are going to tell me i need to start over all over?

again the process import does not create a mermaid diagram.. what the fuck

All 4

Ehm.. the canvas is to busy. I would put them all together as a seperate page under god mode for now. With engineering?

again the mermaid is not being created in the process import please anchor this better

it is really annoying.. i create flows in wta platform.. IT ABSOLUTELY NEEDS TO STAY IN WTA holding when i open in designer does not go to logicorp.. because it does. i see flows I created there and not in the genome.. this is frustrating.. i thought i created them in wta holding.. this is a mess.. I am trying to create the base here...

alot of the issues are process blocks.. why doesnt the process import recognize this? workflow designer is orchestrator.. process blocks do database calls.. or integration calls...

again a No is here the green path.. can you put a rule on that? default warehouse NO is also green..

again can you explain to me.. why the platform saves a workflow that has not been approved yet in the process import...

why is the line between split hibccode and parse AIS FORM SCANNEDTIED.. NOT GREEN? ETC.. SHOULD the blocks with in / out only.. inherit color of previous block?

can we add the strip again with zoom in / zoom out, full screen, minimize side panel with all the blocks etc, use AI to restructure the flows? allign blocks etc etc?

can you remove the splitbarcode workflow.. this is not the final one.. again the platform saved a workflow where it has not passed the full process in the process import function...

how come it is spagettig again compared to the diagram in the process import?

wha a spegtti... we agreed on bus linres,.. it is a big mess... i want you to run a 5 times run and open the designer, check reult .. and fix the issues, then run test again... it is terrible!

now the workflow doesnt load in the tab again.. this is getting so frustrating ... what are the rules in the mermaid diagrams you make.. those are clear... do we need to apply those on the workflows? question so please respond before start building? because mermaids are clear... and workflows are a mess

well i press open in designer.. now you cannot even get that to work... what the fuck

what the fuck... i am in wta honing subscriber.. i reload and i end up in logicorp... THAT CAN NEVER HAPPEN! this may result a engineer makes changes in wrong system...

again when i press open in designer the app opens, no subscriber can be selected and the workflow does not get loaded.. can you do a deep root cause analysis and run the process yourself 4 times.. to make sure it works consitently. then you apply those changes in the process.. because i have been at this now for 8 hours

can you do the same test again to see if everything is resolved

test again

try again

what is so diffucult for you to have another tab open in browser with keeping credentials of my user and open the app again... there ar etons of solutions out there that can do that

again i am in wta holding and when opening the tab it asks me to login to logicorp

again coming from idle the preview is not loading.. only after a prompt on the left side

now it is asking to log in again.. I am going crazy.. how hard is this?

app doesnt load again during startup... we are now 40 seconds in

again i come to website from idle state and the app is not loading only after i put a command in the left lovable command input box

again mermaid is not loading

it is annoying whn i want i press open in designer in process import then i need to login again... user is already logged in

again.. when i press op in designer, it opens a tab that is good.. do not want to log back on

ok.. enough is enough.. everytime the syhstem goes idle.. or when i start the app new.. the preview screen does not load.. yet again.. the minute I type and give response ro you it will load.. it has been annoying me all freaking day

fucking annoying... app again does not load fast now